Any machine after a long time of use, more or less there will be some problems, cold regeneration machine is no exception, but these problems will not immediately show up, need operators to find out in time.

冷再生机操作人员在工作中应注意观察各设备的运行状况，做好巡查工作，尤其要注意设备的传动部位是否润滑良好，有无磨损。此外，还应当仔细查看各连接处是否出现了松动的问题，动物是否灵活等，如果发现了问题的话，应及时进行紧固、修复或者是更换。

The operator of the cold regenerator should pay attention to observe the operation condition of the equipment, do a good job of inspection, especially pay attention to whether the transmission part of the equipment is well lubricated and whether there is wear. In addition, it is necessary to carefully check whether the joints are loose and whether the animals are flexible. If any problem is found, it should be fastened, repaired or replaced in time.

冷再生机出租

Rental of cold recycling machine

在冷再生设备运行过程中，应当注意结合眼睛、耳朵去搞清楚每一种不同的声音，如果有不正常声响的话，应查明原因，妥善处理。

During the operation of cold regeneration equipment, we should pay attention to the combination of eyes and ears to find out each different sound. If there is abnormal sound, we should find out the reason and deal with it properly.

此外，还应当善于辨别各种不同的气味。比如油温过高，出料温度超限，电路、电器过载而严重发热，或者是短接烧坏，以及不正常摩擦而造成的过热等，这些情况都会发出不同的气味，这时候我们就可以及时发现问题，解决问题。

In addition, we should also be good at distinguishing different odors. For example, the oil temperature is too high, the discharge temperature exceeds the limit, the circuit and electrical appliances are overloaded and seriously heated, or the short-circuit is burnt out, and the overheating is caused by abnormal friction, etc. these situations will emit different smell, at this time, we can find and solve the problem in time.