当我们不用压路机时，保养就显得尤为重要，长期不适用的时存放也是需要格外关注的，下面就由冷再生机租赁人员为您讲解一番吧。

When we don't use the roller, maintenance is particularly important. When it is not applicable for a long time, storage also needs special attention. Let's explain it to you by the rental personnel of the cold recycling machine.

所处的环境尽量避免潮湿，并且在地面上铺上木板，避免在不干燥的环境中。在比如：停放后还要在设备上盖好罩布，以免有灰尘进入到设备中。

The environment shall be kept away from humidity as far as possible, and wooden boards shall be laid on the ground to avoid being in a non dry environment. For example, after parking, cover the equipment with a cloth to prevent dust from entering the equipment.

当然，对于租赁的压路机在存放之前之前，要行保养，把设备清理干净，如果有损坏的几件我们要进行修复，随时让设备处于好的情况。对于设备的发动机，要把里面的冷却水给放干净，发动机机油也要及时的更换掉。要知道，燃油机是需要加油的，不然会容易生锈。

Of course, before storing the leased roller, we should first maintain and clean the equipment. If there are damaged parts, we should repair them to keep the equipment in good condition at any time. For the engine of the equipment, the cooling water inside should be drained and the engine oil should be replaced in time. You know, the fuel engine needs to be refueled, otherwise it will rust easily.

设备打算长期不用的时候，我们也要定期的启动发动机，这样才能够防止设备生锈。当然在启动前要把冷却水注满，在存放前要再次放掉。对于蓄电池的保管也是很重要的，要把蓄电池拆下来防止干燥的环境中。

When the equipment is not intended to be used for a long time, we should also start the engine regularly, so as to prevent the equipment from rusting. Of course, the cooling water should be filled up before startup and drained again before storage. It is also very important for the storage of the battery. It is necessary to remove the battery to prevent it from being in a dry environment.

记住，我们须要注意的是，不能再压路机蓄电池上面放置导电的物体，在拆卸时，也要注意把电源关掉，避免意外事故的发生。设备的防锈处理是很关键的，在存放前可以先把整机进行重新的喷漆，有金属裸露的地方更是需要防锈的。

Remember, what we need to pay attention to is that we can't put conductive objects on the roller's battery. When disassembling, we should also pay attention to turning off the power to avoid accidents. The anti rust treatment of the equipment is very important. Before storage, the whole machine can be repainted, and the exposed metal parts need anti rust.

想要了解更多关于这方面的知识，欢迎咨询正规公司，同时也希望您能给我们提供宝贵的意见和建议，关注我们http://www.tclqgc.com，了解更多！

If you want to know more about this, you are welcome to consult regular companies. At the same time, we hope you can give us valuable opinions and suggestions, and pay attention to us http://www.tclqgc.com Yes, learn more!