新闻中心
新闻资讯
联系我们
山东途畅路桥工程有限公司
联系人:石总
电话:18264104888
地址:山东省济南市槐荫区经一路273号群盛华城
路面冷再生机施工过程中常见问题及应对
来源:http://www.tclqgc.com/ 日期:2022-11-18 发布人:
作为旧道路改造重生的大哥人物——路面冷再生机可是承担了它这个年龄所不该承受的压力和责任,只要是针对沥青道路改造的工程,都少不了它那厚重的身影,然而在施工过程中受到许多因素的影响总会出现许多问题,下面冷再生机出租厂家就来讲解一下哪些常见问题的解决方法。
As the big brother of the old road reconstruction, the road surface cold recycling machine has shouldered the pressure and responsibility that it should not bear at its age. As long as it is aimed at the asphalt road reconstruction project, it has its heavy shadow. However, many problems will always occur due to the influence of many factors in the construction process. The following cold recycling machine rental manufacturer will explain the solutions to some common problems.
1、要是混合物的局部含有很多的水,为了避免翻浆压不住。挖掘出水的混合物,用适宜的水分含量替代水的混合物(要是辊子的结构部位与混凝土相混),则在手动地面找平以后将辊子卷起。
1. If there is a lot of water in the local part of the mixture, in order to prevent the grout from boiling. For the mixture of excavated water, replace the mixture of water with appropriate moisture content (if the structural part of the roller is mixed with concrete), roll up the roller after manual leveling.
2、要是有工程施工区间,遇到漏条或跳打问题,在冷再生泄露区由人工服务铺装混凝土,再生器再循环再生器。要是部位不大,则应当用冷再生电机转子遮盖较小值。基本原则就是说防止多打,弄坏完成的结?构。
2. If there is a problem of missing strips or jumping in the construction section, the concrete shall be paved manually in the cold regeneration leakage area, and the regenerator shall recycle the regenerator. If the position is not large, the smaller value should be covered by the cold regeneration motor rotor. The basic principle is to prevent excessive knotting and damage the finished knot? Structure.
3、要是雨期混凝土已铺装在地面上,则依据降水的大小,适度地减小或终止冷回热器的供水,使振动压路机快速地被振动辊辗压,如轧辊。在搅拌轮的情况下,用振动压路机振动辗压2遍后即可。
3. If the concrete has been paved on the ground in rainy season, the water supply of the cold reheater shall be appropriately reduced or terminated according to the precipitation, so that the vibratory roller can be quickly rolled by the vibratory roller, such as the roller. In the case of mixing wheel, it can be rolled by vibratory roller twice.
以上就是关于路面冷再生机在施工过程中常见问题的解决措施了,希望能够对那些在施工中出现问题的朋友有所帮助。更多相关内容就来我们网站http://www.tclqgc.com咨询!
The above is about the solutions to common problems in the construction process of pavement cold recycling machine. I hope it can help those who have problems in the construction. Come to our website for more information!
下一篇:路面冷再生机施工过程中常见问题解决 上一篇:冷再生机突出的四大优势
阅读/ Recommended reading
- 冷再生机出租对道路施工行业的影响 2024-12-18
- 如何选择冷再生机出租服务 2024-12-16
- 冷再生机出租:道路施工的新选择 2024-12-11
- 冷再生机租赁在土壤稳定中的应用与优势 2024-12-09
冷再生机和路拌机区别
[2018-08-23]
冷再生机和路拌机在路面施工及维修中各有其独特的功能和适用场景,它们之间的主要区别体现在以下几个方面: Cold recycling machines and road mi...