冷再生机施工前的准备工作主要包括人员准备、机械准备、材料准备、交通协调及后勤保障。下面冷再生机出租厂家就从这几个方面来为您讲解下相关内容吧。

The preparation before construction of the cold regeneration machine mainly includes personnel preparation, mechanical preparation, material preparation, traffic coordination and logistics support. The following cold regeneration machine rental manufacturers will explain the relevant content to you from these aspects.

（1）材料要求：水泥选用强度等级为32.5、初凝时间≥3h、终凝时间≤10h且≥6h硅酸盐或普通硅酸盐水泥。水泥应具有良好的工作性、低水化、高后期强度、耐久性、耐腐蚀性和抗裂性能。

(1) Material requirements: Portland or ordinary Portland cement with strength grade of 32.5, initial setting time ≥ 3h, final setting time ≤ 10h and ≥ 6h shall be selected. Cement shall have good workability, low hydration, high late strength, durability, corrosion resistance and crack resistance.

（2）机械要求：工程施工过程通过再生机组来完成，再生机组包括：冷再生主机、水泥稀浆车、平地机、压路机等。

(2) Mechanical requirements: the project construction process is completed through the regeneration unit, which includes: cold regeneration host, cement slurry truck, grader, roller, etc.

（3）人员要求：工程技术人员及机械操作人员应经过冷再生培训并经过考核合格后方可上岗。

(3) Personnel requirements: engineering technicians and mechanical operators shall receive cold regeneration training and pass the examination before taking up their posts.

（4）工程协调：作好施工总体计划，采取不中断交通半幅施工，作好施工期间交通疏导工作，准备施工作业面的遮挡。

(4) Project coordination: make the overall construction plan, take the half width construction without interrupting the traffic, do a good job of traffic dredging during the construction, and prepare for the shelter of the construction working face.

此外要知道，冷再生机施工后，等路面强度达到要求后，用空压机吹净浮灰，撒布透层油后，上面洒石屑，之后开放交通。更多相关事宜就来我们网站https://www.tclqgc.com进行咨询！

In addition, after the construction of the cold recycling machine, after the pavement strength meets the requirements, use the air compressor to blow the dust, spread the priming oil, sprinkle stone chips on it, and then open the traffic. Come to our website for more related matters https://www.tclqgc.com Consult!