As the working mechanism of pavement milling machine, the milling wheel is one of the core components of pavement milling machine products. The advanced design and precision of milling wheel are the key to ensure the technical performance and quality of pavement milling machine products.

在铣刨轮在设计、专有技术是空的，和手动对接焊是用来确保主要参数如螺旋线排列参数，刀具的长度和旋转的角度都不能保证，引起路面铣刨机工作时刀具磨损快、消耗功率大、机械振动加剧，铣削后路面平整度差，修边性能不好，影响了路面铣刨机的工作效率和整机的技术性能。

When the milling wheel is designed in China, the proprietary technology is empty, and the manual butt welding is used to ensure that the main parameters such as helix arrangement parameters, tool length and rotation angle can not be guaranteed, resulting in rapid tool wear, high power consumption, intensified mechanical vibration, poor pavement flatness and poor trimming performance after milling, It affects the working efficiency of pavement milling machine and the technical performance of the whole machine.

为了掌握安徽武环路面铣刨机的核心技术进步的技术性能，该厂充分利用现有的计算机资源，建立了铣刨轮技术研究小组。在充分利用三维设计软件的基础上，开发了铣刨轮计算机辅助设计系统。

In order to master the technical performance of the core technology progress of Anhui Wuhuan pavement milling machine, the factory has established a milling wheel technology research group by making full use of the existing computer resources. On the basis of making full use of three-dimensional design software, a computer-aided design system for milling wheel is developed.

，我们应该明白，设计铣刨轮应满足的要求是：

First of all, we should understand that the requirements for designing milling wheels are:

（1）铣刨能耗低，铣刨效率高。

(1) Low milling energy consumption and high milling efficiency.

（2）铣刀受力均匀，铣刨平稳性好，力波动小。

(2) The force on the milling cutter is uniform, the milling stability is good, and the force fluctuation is small.

（3）铣刨产生的废物大小均匀，粉尘小。

(3) The waste generated by milling is uniform in size and small in dust.

（4）铣刨轮的几何参数：根据具体情况，选择铣圆直径、转子轴直径、刀具螺旋角和铣刀间距。

(4) Geometric parameters of milling wheel: select milling circle diameter, rotor shaft diameter, tool helix angle and milling tool spacing according to specific conditions.

（5）铣刨轮的工作参数：合理确定铣刨机的转速和铣刨机的牵引速度。

(5) Working parameters of milling wheel: reasonably determine the speed of milling machine and the traction speed of milling machine.

（6）制造的可能性：连接设计和制造主要体现在铣刀头的布置和刀具库和铣削轴的焊接上。

(6) Possibility of manufacturing: connection design and manufacturing are mainly reflected in the layout of milling cutter head and the welding of tool magazine and milling shaft.

（7）设计方案的选择和修改：所开发的软件可根据设计者的要求进行选择，并可用于修改相关参数的设计直到设计者满足。

(7) Selection and modification of design scheme: the developed software can be selected according to the requirements of the designer, and can be used to modify the design of relevant parameters until the designer meets the requirements.

综上所述，铣刨机租赁其铣刨轮设计在综合考虑各种因素后，可以将所有的参数融合在一起。通过人机对话，可以为设计者设计一个普通铣轮的设计方案。

To sum up, the milling wheel design of the milling machine can integrate all parameters after comprehensively considering various factors. Through man-machine dialogue, a design scheme of ordinary milling wheel can be designed for designers.