冷再生租赁机是一种率、多用途的施工机械。主要用于沥青混凝土路面的铣刨以及添加沥青、水等材料后的旧沥青路面的再生。也可用于公路、城乡道路、机场、码头、停车场等工程的基层、底层稳定土现场就地拌和作业。那么大家了解它正确的操作方式吗？下面小编和大家分享一下。

The cold regeneration leasing machine is a kind of high-efficiency, multi-purpose construction machinery. It is mainly used for milling asphalt concrete pavement and regeneration of old asphalt pavement after adding asphalt, water and other materials. It can also be used for on-site mixing of stabilized soil at the base and bottom of highways, urban and rural roads, airports, wharves, parking lots and other projects. So do you know the correct way of operation? Let me share with you.

1.使用后控制台时，需将开关拨到后控制，此时前控制台无作用，此外各个小喷头开关可以使用后控制台打开、关闭。

1. When using the rear console, it is necessary to turn the switch to the rear control. At this time, the front console has no effect. In addition, the switches of each small nozzle can be opened and closed using the rear console.

2.乳化沥青设备不能灌的太满，加油口盖须关紧，运输过程中以防沥青溢出。

2. The emulsified asphalt equipment cannot be filled too full, and the filler cap must be closed tightly to prevent asphalt overflow during transportation.

3.乳化沥青设备在喷洒前一定要检查各阀门位置是否正确。加入乳化沥青设备内的热态沥青须达到160~180℃的工作温度，长距离运输或工作时间过长，可使用加温装置保温，但不能当作熔油炉。

3. Before spraying, the emulsified asphalt equipment must check whether the positions of all valves are correct. The hot asphalt added into the emulsified asphalt equipment must reach the working temperature of 160 ~ 180 ℃. For long-distance transportation or long working time, the heating device can be used for insulation, but it cannot be used as an oil melting furnace.

冷再生机是怎么维修路面的呢？

How does the cold recycling machine repair the road?

先清理干净的破损的旧路面，经机器均匀铺洒一层水泥之后，在经过冷再生机铣刨与将新的混合材料混合，配合水车一次性将旧路面改造再生成新的基层路面。

Clean up the damaged old road surface, spread a layer of cement evenly by the machine, then mill and mix the new mixed materials by the cold recycling machine, and cooperate with the water truck to rebuild and regenerate the old road surface into a new base road surface.

胶轮压路机随后将基层路面压实成型，经振动压路机再次压平，平地机整平后，新的路面基层就生成了。振动压路机压实一系列配套设备联合作业，旧路面一次性再生成为新的路基，废旧路面全部就地利用，循环再生成为新的基层路面。

The rubber tyred roller then compacts the base course and forms the road surface. After being leveled by the vibratory roller and leveled by the grader, a new road base is generated. The vibratory roller compacts a series of supporting equipment for joint operation. The old pavement is regenerated into a new subgrade at one time, and all the waste pavement is used locally, and recycled into a new base pavement.

经过7到8天的洒水养生之后，新的路基就可以按照路面等级需要铺洒水稳碎石、压实成型后再摊铺沥青路面，新路就生成了水稳碎石层。

After 7 to 8 days of watering and curing, the new subgrade can be paved with water stabilized crushed stone according to the pavement grade, and then paved with asphalt pavement after compaction. The new road will generate a water stabilized crushed stone layer.

冷再生机这种，循环再生的施工工艺，以及其稳定快捷的工作性能，得到用户的高度赞誉。冷再生干活速度快，既节省人力又节约成本，性能还稳定可靠。从很大程度上满足了客户的需求。

The construction technology of cold regenerator, which is energy-saving, environmental protection and recycling, as well as its stable and fast working performance, has been highly praised by users. The cold regeneration works fast, saving manpower and cost, and the performance is stable and reliable. To a great extent, it meets the needs of customers.

冷再生机是工地工作中用的多的机械。可以有效的帮助施工的工人们加快工作效率和提高工程质量。冷再生机出租行业近年迎来了春天，在原有市场道路整修中使用的冷再生机，在新建道路中，高速和高铁都应用了改良土路基施工，冷再生机从此排上了大用途，冷再生机比路拌机效率高，。

Cold regenerator is a kind of machine used in construction site. It can effectively help construction workers to speed up work efficiency and improve project quality. In recent years, the cold recycling machine rental industry has ushered in the spring. The cold recycling machine used in the road renovation of the original market has been used in the construction of improved soil subgrade in the new roads, high-speed and high-speed railways. The cold recycling machine has been put into a large use since then. The cold recycling machine is more efficient than the road mixer, energy saving and environmental protection.

冷再生机的正确操作方式解析就是这样了，如果您对此有什么问题要解答就来我们网站http://www.tclqgc.com咨询了解吧！

This is the correct operation mode of the cold regenerator. If you have any questions about this, please come to our website http://www.tclqgc.com Consult and understand!