维特根 3800 CR 就地冷再生机介绍

Introduction to Wittgen 3800 CR on-site cold regeneration machine

维特根 3800 CR 冷再生机的工作宽度为 3.8 m，再生深度为 0 - 150 mm，配备 708 KW 的高性能发动机，确保了再生的性。设备不仅能够使用常见的上切铣刨工艺，而且还能够使用维特根研发的下切工艺进行再生施工。当装备了输料皮带，采用下切铣刨工艺获得的混合料便被输送到行驶在后面的沥青摊铺机中，然后及时地进行均匀摊铺。

The working width of the Wittgen 3800 CR cold regeneration machine is 3.8 m, and the regeneration depth is 0-150 mm. It is equipped with a high-performance engine of 708 KW, ensuring the high efficiency of regeneration. The equipment can not only use the common upper cutting milling process, but also use the lower cutting process developed by Wittgen for regeneration construction. When equipped with a conveyor belt, the mixture obtained by the down cutting milling process is transported to the asphalt paver running behind it, and then evenly spread in a timely manner.

设备优势

Equipment advantages

再生宽度为 3.8 m 宽时可 100 % 再生 15 cm 厚的沥青混凝土层

When the regeneration width is 3.8 m, a 15 cm thick asphalt concrete layer can be 100% regenerated

以整个工作宽度一次性无缝再生一个车道，施工效率极高

Seamless regeneration of one lane at a time across the entire working width, with extremely high construction efficiency

与之匹配的摊铺机具有很大的材料输送能力，故原路面材料的不均匀性得以，并可铺筑出良好的横断面

The matching paver has a great material conveying capacity, so the unevenness of the original pavement material can be eliminated and a good cross-section can be paved

下切施工作业大大优化材料的级配

The downward cutting construction operation greatly optimizes the grading of materials

双重功能：即能够当作后出料再生机，又可以作为高性能铣刨机进行使用

Dual function: It can be used as both a post discharge regeneration machine and a high-performance milling machine

本文由 冷再生机租赁 友情奉献.更多有关的知识请点击   http://www.tclqgc.com  真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

This article is a friendly contribution from Cold Recycling Machine Rental For more related knowledge, please click http://www.tclqgc.com Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.