(1) The driving of traveling crane and milling and mixing device are all hydraulic transmission.

(2)行走速度和铣拌转子转速均可以无级调速。

(2) The traveling speed and milling rotor speed can be adjusted steplessly.

(3)行走系统采用前、后轮驱动其中(DGL系列为前桥驱动，WB系列为前、后桥驱动)，全液压转向。

(3) The traveling system adopts front and rear wheel drive (DGL series is front axle drive, WB series is front and rear axle drive), and full hydraulic steering.

(4)铣拌转子的提升和下降、尾门的开启和关闭均由电磁阀操纵。

(4) The lifting and lowering of milling rotor and the opening and closing of tail gate are controlled by solenoid valve.

(5)驾驶室采用密封式，带空调设备，双方向盘，蔽华数控仪表台，很大程度上地改进了驾驶员的作业环境。

(5) The cab adopts sealed type, with air-conditioning equipment, dual steering wheel and Guihua CNC instrument panel, which greatly improves the driver's working environment.

(6)本机前后轮驱动轮胎选用了宽基低压工程机械轮胎，牵引型花纹。抗振性能好，可以获得更大的牵引力。

(6) The front and rear wheel drive tires of the machine are wide base low-pressure construction machinery tires with traction patterns. Good anti vibration performance and greater traction can be obtained.

平时我们常见的路面就是水泥路和沥青路，冷再生机在维护这两种路面时有哪些区别？

At ordinary times, our common roads are cement roads and asphalt roads. What are the differences between the cold recycling machine in maintaining these two kinds of roads?

1、水泥冷再生

1. Cement cold recycling

水泥冷再生充分利用废旧材料，并按比例加入一定量的添加剂在自然环境温度下就地连续地完成材料的铣刨、破碎、拌合、摊铺及压实成型，冷再生租赁从而修筑出具有所需性能质量的新基层。

The cold recycling of cement makes full use of waste materials, adds a certain amount of additives in proportion, and continuously completes the milling, crushing, mixing, paving and compaction of materials at the natural ambient temperature, so as to build a new base with required performance and quality.

与传统施工方法相比，水泥冷再生成本低、效率高、质量好，可减少污染。

Compared with traditional construction methods, cement cold regeneration has the advantages of low cost, high efficiency and good quality, which can reduce pollution.

2、沥青冷再生

2. Asphalt cold regeneration

沥青路面冷再生将旧路铣刨、剥离所得的回收沥青路面材料，经破碎筛分，抽提测定油石比、矿料级配组成及回收沥青的性能指标后，按新的沥青再生混合料配合比设计，适当加入部分新骨料、水、乳化沥青等，在常温条件下（不加热）拌制新的沥青路面材料。冷再生技术可以降低成本10-20%左右，且生产效率非常高。

Cold recycling of asphalt pavement: the recycled asphalt pavement materials obtained from milling and stripping of the old road are crushed and screened, extracted and determined to determine the asphalt aggregate ratio, mineral aggregate gradation composition and performance indexes of the recycled asphalt. According to the mix proportion design of the new asphalt recycled mixture, some new aggregate, water and emulsified asphalt are appropriately added to mix the new asphalt pavement materials under normal temperature (without heating). Cold regeneration technology can reduce the cost by about 10-20%, and the production efficiency is very high.

以上就是为大家介绍的有关冷再生机租赁的详细介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.tclqgc.com

The above is a detailed introduction to the leasing of cold regenerator. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.tclqgc.com