科技的飞速发展让人们对不同领域的知识都有了一定的涉及，人们可以通过很多渠道获得自己想要的，冷再生机租赁公司的工程师提到其设备是一种道路施工中常用的机器，在此今天就给大家介绍一下使用冷再生机施工的优势体现在如下5个方面：

With the rapid development of science and technology, people are involved in different fields of knowledge. People can get what they want through many channels. The engineers of the cold recycling machine rental company mentioned that its equipment is a kind of commonly used machine in road construction. Today, we will introduce the advantages of using cold recycling machine in construction, which are reflected in the following five aspects:

1、简化了施工过程。由于冷再生机铣工作是将原有的旧路面材料碾碎，在车体内，将碾碎的废骨料在搅拌腔中搅拌直接摊铺，省去了新骨料的挖掘、运输、搅拌站拌和加工、摊铺机摊铺等一系列工作。，简化了施工过程。

1. The construction process is simplified. Because the cold recycling machine milling work is to crush the original old pavement materials, in the car body, the crushed waste aggregate is mixed in the mixing chamber and directly spread, which saves a series of work such as digging, transportation, mixing and processing in the mixing station, spreading by the paver and so on., The construction process is simplified.

2、避免道路施工造成的交通堵塞问题。由于冷再生机械在施工过程中省略了搅拌站的运输和搅拌过程，施工现场的设备投资相对较小。这有效地减少了由于道路建设而造成的交通流量，并产生了较大的负荷。因为冷再生机是在施工和道路施工过程中，我们可以选择半路施工和半路施工，这样可以在不影响交通正常使用的情况下修路。

2. Avoid traffic jam caused by road construction. Because the cold recycling machinery omits the transportation and mixing process of the mixing station in the construction process, the equipment investment on the construction site is relatively small. This effectively reduces the traffic flow caused by road construction, and produces a larger load. Because the cold recycling machine is in the process of construction and road construction, we can choose half road construction and half road construction, so that we can repair the road without affecting the normal use of traffic.

3、施工效率高。传统的筑路工艺是先用铣刨机对废弃路面进行碾磨，然后运搅拌站进行搅拌处理，再运回施工现场用摊铺机摊铺、压路机碾压。在施工过程中，现场冷再生机械属于一次性成型(即冷再生机械一次通过待修复道路后完成铣、拌、铺筑)，以便随着施工进度的推进陆续打通已完工的道路。它可以大大缩短维护路面和提早开 放交通所需的时间。

3. The construction efficiency is high. The traditional road construction technology is to grind the abandoned road surface with milling machine, then transport it to the mixing plant for mixing treatment, and then transport it back to the construction site for paving with paver and rolling with roller. In the construction process, the on-site cold recycling machinery belongs to one-time molding (that is, the cold recycling machinery can complete milling, mixing and paving after passing through the road to be repaired at one time), so as to open up the completed roads with the progress of construction. It can greatly reduce the time required to maintain the road surface and open the traffic ahead of time.

4、保护生态环境，从而有效的节约资源和能源。由于冷再生机铣后的废料几乎全部可以直接送入搅拌仓进行地面搅拌摊铺，减少了新石料的开采，不需要考虑废料的运输和堆放。保护了环境。冷再生器在工作中不需要加热和混合物料，节省了大量能源。冷再生机是对废旧路面原材料进行再利用的一种设备。它没有污染，因此被称为绿色建筑技术。

4. Protect the ecological environment, so as to effectively save resources and energy. Since almost all the waste materials milled by the cold recycling machine can be directly sent to the mixing bin for ground mixing and paving, the exploitation of new stone materials is reduced, and the transportation and stacking of waste materials are not considered. It protects the environment. The cold regenerator does not need to heat and mix materials in operation, which saves a lot of energy. Cold recycling machine is a kind of equipment to recycle the raw materials of waste pavement. It has no pollution, so it is called green building technology.

5、有效的降低了施工成本。与传统施工方法相比，冷再生机械租赁后在施工过程中省略了大量的设备、人员和材料，相对成本就比较低。

5. The construction cost is effectively reduced. Compared with the traditional construction method, a lot of equipment, personnel and materials are omitted in the construction process after the cold recycling machinery leasing, so the relative cost is relatively low.